Frame Number Reset; Format - Rollei PREGO DP5300 Manual

Frame Number Reset

Reset the frame number.
Default reset: Folder number is 100 and file number is 0001.
1. Set the mode dial to [SET-UP] and power on the camera.
2. Use the or
3. Press the SET button.
Frame Number Reset menu is displayed on
the LCD monitor.
4. Use the or
[Execute]: Reset the frame number.
[Cancel]: Does not reset the frame number.
5. Press the SET button to confirm the setting.
Note:
If a folder already exists on SD Memory Card, it assigns older number than the existing
folder.

Format

Formatting erases all images and reformats the SD Memory Card loaded in your
camera. Protected images are also erased. SD Memory Card cannot be formatted if it
is write-protected.
1. Set the mode dial to [SET-UP] and power on the
camera.
2. Use the or
3. Press the SET button.
"Format SD card" menu is displayed on the
LCD monitor.
4. Use the or
[Execute]: Format the memory card.
[Cancel]: Does not format the memory card.
5. Press the SET button to confirm the setting.
60
button to select Fr. No. Reset.
button to select Execute/Cancel.
button to select Format.
button to select Execute/Cancel.