Playback Images In Slideshow; Setting The Slideshow Display Time Interval; Setting The Single-Loop/Endless-Loop Slideshow - Rollei PREGO DA5 Instruction Manual

Playback Images in Slideshow

1
Follow Step 1-2 of "Playback a Still Image".
2
Press <Menu/OK> button to review Menu.
3
Press the Up-arrow ( ) or Down-arrow ( ) button to select
"SLIDESHOW"
4
Press <Menu/OK> button to enter submenu.
5
Select "START" and press <Menu/OK> button. The slideshow will
start from the 1st image in the current image storage.
6
The slideshow will stop after the last image is displayed if the
Slideshow Loop setting is Off or whenever you press the
<Menu/OK> button.

Setting the Slideshow Display Time Interval

1
Follow Step 1-4 of "Playback Images in Slideshow".
2
Select "INTERVAL". Press <Menu/OK> button.
3
Press Up-arrow ( ) or Down-arrow ( ) button to adjust the interval
from 3 to 30 seconds.
4
Press <Menu/OK> button to set up. Press Up-arrow ( ) button to
select "START" to playback the slideshow.

Setting the Single-loop/Endless-loop Slideshow

1
Follow Step 1- 4 of "Playback Images in Slideshow".
2
Select "LOOP". Press <Menu/OK> button.
3
Press the Up-arrow (▲) or Down-arrow (▼) button to set "ON"
(Endless-loop) or "OFF" (Single-loop).
4
Press <Menu/OK> button to setup. Press Up-arrow ( ) button to
select "START" to playback the slideshow.
13