Blind Hem Stitching - Toyota SP20 Series Instruction Manual

Sewing

• Blind hem stitching

Caution
Raise the needle to its highest position, and then turn the pattern selection dial to select
stitch number 7 or 9.
(When sewing stretch fabrics, select stitch number 9.)
Set the stitch length dial to setting "1" or "2".
Zigzag sewing foot
Blind stitch foot
The blind stitch foot
is only included with
model XXX34.
1
Fold back the cloth so that the folded
area protrudes by about 5 to 7 mm.
2
Iron and tack by hand.
In this sewing method the stitch cannot
be seen on the front of the fabric.
Before changing the presser foot, remove the
power plug from the outlet.
Not doing so could cause an injury.
1~2
7
Tacking
Wrong
Right
side
side
5 to 7 mm
9
41