LG 50PM1M - - 50" Plasma Panel Owner's Manual page 35

U514Aen 81/11/9 2:28 PH Page 35
External Control Device Setup
01. Power (Command2:a)
To control Power On/Off of the monitor.
Transmission
[[k][a][ ][Set IU][ ][Uata][Cr] ]
Data O • Power Off 1 • Power On
Ack
[[a][ ][Set ID][ ][OK][Data][x] ]
To show Power On/Off.
Transmission
[[k][a][ ][Set IU][ ][gg][Cr] ]
Ack
[[a][ ][Set IU][ ][OK][Uata][x] ]
* in like manner, if other functions transmit 'OxFF' data
based on this format, Acknowledgement data feed back
presents status about each function.
02. input Select (Command 2 : b)
To select input source for the monitor.
You can also select an input source using the iNPUT but-
ton on the Monitor's remote control.
Transmission
[[k][b][ ][Set IU][ ][Uata][Cr] ]
Data 2 : Video 6 : RGB-DTV
4 : Component1 7 : RGB-PC
5 : Component2 8 : HDMI-DTV
9 : HDMI-PC
Ack
[[b][ ][Set IU][ ][OK][Uata][x] ]
If you use either RGB-DTV or RGB-PC command, It is possi-
ble to select RGB input. And HDMI input mode is also the
same.
*If you read status of the input mode in RGB or HDMI input,
Monitor will always send the DTV mode status.
03. Aspect Ratio (Command 2 : c) (Main Picture Size)
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
SCREEN menu.
Transmission
[[k][c][ ][Set IU][ ][Uata][Cr] ]
Data 1 : Normal screen (4:3)
2 : Wide screen (16:9)
3 : Horizon
4 : Zoom
Ack
[[c][ ][Set IU][ ][OK][Uata][x] ]
* Using the PC input, you select either 16:9 or 4:3 screen
aspect ratio.
04. Screen Mute (Command 2 : d)
To select screen mute on/off.
Transmission
[[k][d][ ][Set ID][ ][Data][Cr] ]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Ack
[[d][ ][Set IU][ ][OK][Uata][x] ]
05. Volume Mute (Command 2 : e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
I[k][e][ ][Set IU][ ][Uata][Cr] ]
Data O : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
Ack
I[e][ ][Set ID][ ][OK][Data][x] ]
06. Volume Control (Command 2 : f)
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Transmission
I[k][f][ ][Set IU][ ][Uata][Cr] 1
Data Min:O-Max:64
* Refer to 'Real data mapping 1'.
Ack
i[f][ ][Set ID][ ][OK][Data][x] ]
* Real data mapping 1
O Step O
A Step 10 (Set ID 10)
F Step 15 (Set ID 15)
10 Step 16 (Set ID 16)
64 Step lOO
6E Step 110
73 Step 115
74 Step 116
C7 Step 199
* Real data mapping 2
O :-40
1 : -39
2 :-38
28:0
4E : +38
4F : +39
50 : +40
Owner's Manual 35