Lpr Printing In Microsoft; Windows Nt ® 4.0, Microsoft ® Windows ® 2000 Pro And; Microsoft ® Windows ® Xp; Print Using An Lpr Port In Microsoft ® Windows Nt ® 4.0 (Pt-9500Pc Only) - Brother PS 9000 - Print Server - USB User Manual

LPR Printing in Microsoft

®
Windows 2000 Pro and Microsoft
This section explains how to setup and print with PS-9000 using LPR of Microsoft
®
Microsoft Windows
Note
●
PT-9200DX doesn't support LPR printing.

Print using an LPR port in Microsoft

(PT-9500PC only)
Note
●
In order to print using LPR, an LPR port must be added. Go to "Start"
Panel" "Network", and then select "Services". Click [Add], select "Microsoft TCP/IP Printing",
–
and then click [OK]. The component is installed. Restart the computer.
1
Go to "Start" – "Settings" – "Printers",
and then double-click [Add Printer] to
start up the wizard.
2
In the following dialog box that
appeared, select "My Computer", and
then click [Next].
3
In the following dialog box that
appeared, click [Add Port], and then
create a new port.
36
®
2000 Pro and Microsoft
®
Windows NT
®
Windows
® ®
Windows XP.
®
Windows NT
• If you have already created a port when
you installed PS-9000, select the port
from the list, and then continue with
step 6.
4
Select "LPR Port" from the "Available
Printer Ports", and then click [New Port].
5
In the "Name or address of server
providing lpd" box, type in the IP address
that was set for PS-9000. In the "Name
of printer or print queue on that server"
box, type in "lp", and then click [OK].
4.0, Microsoft
®
®
XP
®
Windows NT
4.0
®
"Settings" "Control
– –
®
4.0,
®