/nstallation
- When using the remote control, aim it at the remote control sensor on the TV.
POWER
.
Turns your TV or any other programmed
equipment on or off, depending on mode.
Selects the remote operating mode: TV,
DVD, VCR, AUDIO, CABLE or STB. Select
a mode other than TV, for the remote to
operate an external device.
MENU
Brings up the main menu to the screen.
Enters or exits a Panel Menu in the TV Guide
On Screen system.
EXIT
Clears all on-screen displays and returns to
TV viewing from any menu.
MUTE
Switches the sound on or off.(Refer to p.90)
TIMER \
Lets you select the amount of time before
your TV turns itself off automatically.
\.
ADJUST
Ad}usts screen position, size, and phase in
PC mode.
EZ P[C
Selects a factory preset picture mode
depending on the viewing environment.
Freezes the currently-viewed
picture. Main
picture is frozen in PIPfTwin picture mode.
TV/V[DEO
put modes rotate in regular
sequence: Antenna, Cable, Video, Front
Video, Component
1-2, RGB-DTV (or
RGB-PC),
HDMI!/DVI
and HDMI2 input
sources.
(Video, Front Video, Component
1-2 input
sources are linked automatically,
only if
these are connected
)
TV GUIDE
Brings up the TV Guide On Screen sys-
tem to the screen.
Mark
Selects a photo or music you want to
view or play in Xstudio mode.
"
- FAV
Scrolls the Favorite channels.
.....FLASHBK
J""
Tunes to the recent channels.
PIP
Switches to PiP, POP (Picture-out-of-
Picture) and Twin picture modes in regu-
lar sequence.
Switches the video window locking or
unlocking in the Listings Grid.
P[PCR-/P[PCH+
Changes to the next higher/lower PIP
channel.
PIP INPUT
Selects the input source for the sub pic-
ture in PiP/Twin picture mode.
SWAP
Exchanges the main/sub images in
picture mode,
Starts the demonstration
to explain the main
features of this TV.
UGRT
Illuminates the remote control
buttons of selected mode.
I0
Plasma TV