Basic Operation; Turning The Power; Loading Discs; Adjusting The Volume - Denon S-81 Operating Instructions Manual

ENGLISH
< >
5
BAND
ON/STANDBY
<FUNCTION>
[OPEN/CLOSE]
[SDB/TONE]
8
BAND
[ ]
6
SEARCH
[ENTER/MEMO]
[CLEAR]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Basic Operation

8 9
Turning the power on
ON/STANDBY
Press
When the power is turned on, the function that was being used
when the power was last turned off is selected (selector
function).
TUNING
<VOLUME>
¢ Turning the power off (to the standby mode):
Press ON/STANDBY again.
ON/STANDBY
• Information on the power indicator
• Power on ..................................Blue
[TUNER]
• Standby mode...........................Red
• Low-power standby mode........Off (
• Timer standby mode .................Orange
When in the low-power standby mode, a very small amount of
9
power is consumed, even if all the indicators are turned off.
[ ]
7
[VOLUME]

Loading discs

[MENU/SET]
( page 3)
[D , H , G , F]
< >
Press 5
¢ To close the disc tray:
Press < > or [OPEN/CLOSE] again.
5
NOTE:
• Be sure to turn on the power when opening and closing the disc
tray.
• Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
• Do not insert foreign objects into the disc tray. Doing so will
damage it.
.
) ( page 19)
[OPEN/CLOSE]
or to open the disc tray.
12
ENGLISH

Adjusting the volume

< VOLUME >
[VOLUME]
Turn or press

Adjusting the tone

1
[SDB/TONE]
Use to select the tone parameter to be
adjusted.
SDB BASS TREBLE
S. DIRECT BALANCE
SDB: Adjusts the low bass sound.
BASS: Adjusts the bass sound.
TREBLE: Adjusts the treble sound.
BALANCE: Adjusts the left/right volume balance.
S. DIRECT: The sound is played with the tone flat.
2
To emphasize the low bass sound:
When "SDB ON/OFF" is displayed, use
-1
to select "ON" or "OFF".
2
To adjust the bass or treble sound:
When "BASS" or "TREBLE" level is displayed, use
-2
or to adjust.
8 8 9 9
2
To adjust the left/right volume balance:
When "BALANCE" is displayed, use
-3
adjust.
• The tone is only flat when "S.DIRECT" is selected. To adjust the
tone controls set a made other than "S.DIRECT".
.
8 8 or 9 9
8 8 or 9 9 to