Operation; Menus; Automatic; Range - Eagle SUPRAPRO I.D. Installation And Operation Instructions Manual

OPERATION

MENUS

The SupraPro I.D. use menus to guide you through the unit's functions and
features. The menu key accesses these features, allowing you to custom-
ize the unit to your particular needs and water conditions. All you have to
do to leave one menu and enter another is press the menu key repeatedly.
Press the ON/CLEAR key to clear the menus from the screen.

AUTOMATIC

When the SupraPro I.D. is first turned on, the automatic feature is enabled.
This feature automatically adjusts the unit's range and sensitivity accord-
ing to water conditions. It always keeps the bottom displayed in the lower
portion of the screen.
To turn the automatic feature off, press the
menu key until the AUTO/MAN menu ap-
pears. Now press the down arrow key. This
moves the black bar to the letters "MAN." The
unit is now in the manual mode. To turn the
automatic feature on again, repeat the above
steps, except this time press the uparrow key
to move the black bar to the word "AUTO".

RANGE

You can't adjust the range when the SupraPro I.D. is in the automatic
mode. It is adjustable when the unit is in the manual mode. To do so, first
put the unit in the manual mode. Now press the ON/CLEAR key to clear the
screen. Then press the menu key until the "RANGE SEL" menu appears
as shown at right. The current range shows at the bottom of the menu. In
this case, the range is 60 feet. Now press the
up arrow key to decrease the range, the down
arrow key increases the range. After you se-
lect the desired range, press the ON/CLEAR
key to clear the display. If you wait a few
seconds, it will automatically clear.
The SupraPro I.D. has the following ranges:
0 - 10, 20, 40, 60, 120, 240, 480 and 900
feet. Metric range has 0 - 5, 10, 20, 40, 60,
100, 200, and 300 meters.
10