Ialing Acid Number - GE 21028GE3-A User Manual

4. Use the touch-tone pad to enter a memory location number (for
example, press 01 to store the record in memory location one).
NOTE: If the memory location is occupied, "REPLACE MEMO?" is displayed,
and you must confirm replacement by pressing the MEM button.
NOTE: Press the *EXIT button once to keep the previous setting and return
to the sub-menu.
D CID N
IALING A
While reviewing CID records, you may dial the phone number showing in
the display.
1. Make sure the phone is OFF (not in talk mode).
2. Press CID/VOL (
the display.
NOTE: Depending on (a) how the incoming caller's phone number is
formatted when it is received, and (b) whether or not you previously pre-
programmed your local area code into the set up menu, you may need to
adjust the format of the incoming caller's stored phone number before
making the call.
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
3. If the number does not dial as shown, press the FORMAT/CONF button.
Repeat if necessary, until the correct number of digits show in the display.
UMBER
or ) button until the desired CID record shows in
Explanation
long distance code "1 "
+3-digit area code
+7-digit telephone number.
3-digit area code +
7-digit telephone number.
7-digit telephone number.
Example
1-317-888-8888
317-888-8888
888-8888
41