0X0B Parameter Dump - Lexicon PCM 80 V1.10 Midi Implementation Manual

Lexicon
0x0B Parameter Dump
This is a bidirectional message used when a PCM 80 is transmitting SysEx Automation data. It may be
transmitted or received by a PCM 80. Parameter types include:
Type 0 System Parameters: Parameters such as MIDI Channel, Edit Mode (Pro or Go), Mix Mode, etc.
which are not saved with an effect, but are part of the system setup.
Type 1 Patchable Parameters: Includes all parameters that can be patch destinations These are saved
with an effect.
Type 2 NonPatchable Parameters: Parameters such as envelope threshold which are saved with the
effect but cannot be patch destinations.
Byte # Byte Value
1 F0
2 06
3 07
4 0iii iiii
5 0B
6 0x
7 0iiiiiii
8 0000000i
9 0000iiii
10 0000iiii
11 0000iiii
12 0000iiii
13 F7
Description Notes
SysEx ID
Lexicon ID
PCM 80 ID
Device ID
Parameter Value
Parameter Type 0=system; 1=patchable;
2=nonpatchable
Parameter Offset See appendix according to type.
Tempo Mode Flag 0=Absolute mode; 1=Tempo Mode. This flag defines the following value
field as being an absolute 16-bit value (Flag=0) or a ratio value split into
bytes (Flag=1). It also forces the parameter into the appropriate mode.
This flag should be 0 except for those parameters that support Tempo
Mode. See the flags field for the appropriate parameters in the appendi-
ces describing the algorithms or use the Parameter Specific Response.
Least-significant nibble
of absolute value or
numerator byte Out-of-range values transmitted to PCM 80 will be adjusted to legal
values.
Next nibble of absolute
value or numerator byte
Next nibble of absolute
value or denominator byte
Most-significant nibble
of absolute value or
denominator byte
End of SysEx
PCM 80 Version 1.10 MIDI Implementation Details
11