Clearing Learned Assignments - Lexicon MPX 110 - REV 1 Manual

MPX 110

CLEARING LEARNED ASSIGNMENTS

To clear a learned assignment:
1. Simultaneously press the Store and Tap buttons
to activate Learn mode. The Store LED will flash
slowly and the Tap LED will light to indicate that
Learn Mode is active.
2. Adjust the desired front panel control - Mix, Effects
Lvl/Bal, Adjust, Bypass, or Tap.
Note:
Be careful that any attached MIDI device (such as
a footpedal) does not accidentally send any
learnable message. If it does, that will be learned
as a new patch.
3. Press Store to clear the assignment. The Store LED
will flash quickly.
4. To clear another front panel assignment, repeat steps
2 and 3.
5. Simultaneously press the Store and Tap buttons
to deactivate Learn Mode.
Learnable Front Panel Controls
and Assignable MIDI Sources
Front Panel Controllers
Control 1 to 31, 33 to 119
Mix Yes
Effects Lvl/Bal Yes
Adjust Yes
Bypass Yes
Tap Yes
* Program Change numbers 0 to 15 will be ignored, except on the
MIDI channel assigned the Program Load function.
MIDI Operation
Pgm Change
100 to 127 *
No
No
No
Yes
Yes
5-7