Lexicon MPX 1 - REV 1 User Manual page 120

MPX 1 User Guide
9-12
Programs 165-199 each contain a single effect. While each of these programs is meant
to be used alone, many can be used as building blocks when you create your own multi-
effect programs from scratch. Use Copy Effect in Edit mode to copy different combina-
tions of these effects into a single program.
165 ClassicDtune
A simple, but very useful effect. Use it to fatten up just about anything in a PA or recording
mix. The left side is shifted up 8 cents, and the right side is shifted down 8 cents.
166 Major/Minor
The first parameter in the Soft Row selects A Major or minor 3rd above for the left output.
The right output is a perfect fifth above.
167 Transposer
The first parameter in the Soft Row lets you change the key of your processed sound.
168 Stereo Shift
The first parameter in the Soft Row allows you to shift the pitch of a stereo signal in semi-
tones.
169 MIDIfixVocal
Use MIDI Pitch Bend to pitch shift your stereo signal, in 1 cent intervals, +1 semitone.
170 Tuning Note
An internal sine wave generator is set to output a tone equivalent to A4. The first
parameter in the Soft Row changes the pitch.
171 Rich Chorus
The name says it all.
172 Rotary
Fast speed rotary cabinet.
173 Aerosol
Deep resonant stereo flanger.
174 Phaser
Slow speed phase shifter.
175 Flanger
Slow mono flanger with lots of resonance.
176 Comb
Comb filter set to create a highly colored sound. Change the value of the Comb parameter
to change colors.
177 Stereo 2Band
2- band stereo parameteric EQ.
178 DigitalEQ(S)
Stereo 2-band EQ routed for best digital performance.
179 DigitalEQ(M)
Mono 4-band EQ routed for best digital performance.
180 Crossover
In this crossover EQ effect, the input is summed to mono. Frequencies below the
crossover point are sent out the left output and frequencies above the crossover point are
sent out the right output.
Lexicon