Bassrt; Bass Xov (Bass Crossover); Diffusion; Early Level - Lexicon LXP NATIVE Owner's Manual

BassRT

This parameter controls bass reverb time. It is closely associated with the Bass
Crossover and Reverb Time parameters. BassRT is a multiple of Reverb Time that
applies to signal below the frequency described by Bass Crossover. If BassRT is
less than 1.0, then the low frequency part of the reverb tail will be shorter than
the midrange part. If BassRT is greater than 1.0, then the low frequency part of
the tail is longer.

Bass XOV (Bass Crossover)

The Bass XOV parameter is closely tied to the BassRT parameter. It represents
the frequency below which BassRT has an effect.

Diffusion

Input diffusion is the first part of processing for any signal entering a reverb or
delay. It can be described as a smearing or softening of the signal and is typically
used to lessen the impact of strong transients.

Early Level

This parameter acts as a master control for any early signals going to the output
channels. Early signals include echoes and reflections.
46 The Parameters
9
LXP Native
|
Reverb Bundle

Echo Parameters

Eko Delay
Controls the delay time of an echo that comes from the indicated input (L or
R) and goes to the same output. It may also recirculate back into the same
input.
Eko FBack
Controls the feedback of an echo that comes from the indicated input (L or R)
and goes back into the same input. The sign of the gain coefficient may be
optionally inverted.
Eko Time Mast
Controls all echo voices in the algorithm. Each echo delay has its nominal
time adjusted by this percentage.
Eko Fbck Mast
Controls all echo voices in the algorithm. Each echo feedback has its nominal
gain adjusted by this percentage.
LXP Native
The Parameters
|
Reverb Bundle
47
9