Table of Contents
Advertisement
TL-PA101
85Mbps Powerline Ethernet Adapter
Enter your Password (Take note to the password format) and click "OK" after setup.
Note:
The Powerline Ethernet Adapter device must be present on the power line (plugged in) in order for the
password to be confirmed and added to the network. If the Powerline Ethernet Adapter device could not
be located, a warning message will be shown.
4.1.3
Add Device
The following dialog box pop-up when clicking the "Add" button under Main configuration homepage.
The dialog box allows you to enter both the selected device's name and password. Noted that the
Powerline Ethernet Adapter must be present on the power grid in order to activate the set password and
added to the local network.
Enter your Device Name and Password (Take note to the password format) and click "OK" after setup.
The following screen display after the naming and password setting process, which is also the
Diagnostics configuration homepage.
11
Advertisement
Table of Contents
