Using Email Alerts To Monitor Server Status - Seagate ST320005SHA10G-RK - BlackArmor NAS 420 Server User Manual

Table 2: Front and Rear Panel LEDs
LED
Disk Drive 1
Disk Drive 2
Disk Drive 3
Disk Drive 4
Using the LEDs to Monitor the Server
1. The System Status LED will indicate when there's a problem. When it's blue, the server
and its components are working properly.
If the System Status LED turns amber, a problem has occurred.
2. Check the LAN port LEDs on the back of the server and the disk drive LEDs behind the
door to locate the source of the problem.
3. If one or both LAN port LEDs have gone off, you may have lost your network connection.
If a disk drive LED is amber in color, that disk drive may have failed (or been removed).
See Chapter 6 "Solving Problems" on page 53 for help solving the problem.

Using Email Alerts to Monitor Server Status

Note: Only BlackArmor administrators can set up email alerts.
You can use BlackArmor Manager to notify you by email when the status of the server
changes or when a server setting is modified. You can set BlackArmor Manager to send
email alerts to up to five people. You must have a Seagate Global Access account to receive
email messages.
To set up email alerts, open BlackArmor Manager (see page 17). Email alerts are in the
System menu. For step-by-step instructions for using BlackArmor Manager, refer to the
online Help.
BlackArmor® NAS 440/420 User Guide (Version 3)
State and Color Indication
Solid Blue Disk drive is installed and operating properly
Solid Amber Disk drive has been removed or has failed
Solid Blue Disk drive is installed and operating properly
Solid Amber Disk drive has been removed or has failed
Solid Blue Disk drive is installed and operating properly
Solid Amber Disk drive has been removed or has failed
Solid Blue Disk drive is installed and operating properly
Solid Amber Disk drive has been removed or has failed
Monitoring Your BlackArmor Server
40