Table of Contents
Advertisement
NETGEAR Stora User Manual
Note:
Currently multiple printers are not supported. If you have a
multi-function printer, scanning is not supported
Optionally, you can also use a powered hub to expand the USB port to support a single
printer and multiple USB drives.
To add a printer - PC
1.
Connect a USB cable from the printer to the Stora-enabled device, or to a USB hub
connected to the device.
2.
Log in to the Stora and go to Explore my Stora folders on the Agent.
.
3.
Double-click the Stora printer icon. The following message appears.
4.
Click OK.
Note:
The Stora icon will only appear if a printer is attached to the USB
drive of your Stora.
5.
If you receive the following message, click OK.
Chapter 2: Stora Agent
| 41
Hide quick links:
Advertisement
Table of Contents
