Table of Contents
Advertisement
To Replace the Disk
1.
View the disk status lights to identify which disk
has failed.
If necessary, unlock the tray lock by moving it to the
right, then press the release of the failed disk. The
latch pops out.
2.
Pull out the disk, and replace the failed disk.
3.
Slide the disk tray back into the unit and secure the
latch.
Note:
To protect against data loss, add a second disk to your Stora to be
used as a mirrored backup of the data on the first disk.
To Check Disk Status or Rebuild a Disk
1.
Open Stora application user interface.
2.
Click Preferences.
3.
Navigate to Administration > Disk Management and locate the Rebuild button.
a. If a rebuild button shows on the screen, click it to find the status of the disk.
b. If no rebuild button shows on the screen, the disk is working properly.
4.
If the disk is bad, replace it. See "Disk Management" on page 106 for more information.
Figure 19 Rebuild a Disk
26 |
Chapter 1: Getting Acquainted
NETGEAR Stora User Manual
Figure 18 Disk Release Latch
Hide quick links:
Advertisement
Table of Contents
