Backup; Services - Linksys NMH305 - Media Hub Home Entertainment Storage NAS Server User Manual

Chapter 7

Backup

The Setup Wizard automatically installs backup software
on your computer to run backup jobs (unless you choose
not to install it); refer to NTI Shadow, page 37. If you
have installed the backup software, then you can use the
backup feature of the Media Hub.
NOTE: The Backup button only supports
Windows computers installed with the backup
software.
Backup
Backup Click Backup to initiate backup jobs specified by
the backup software on your computer(s).
NOTE: Your computer(s) must be powered on
for the jobs to run.

Services

Configure the Remote Access, Windows File Sharing,
Media Server, iTunes Server, and FTP Server settings.
Media Hub
Advanced Configuration
Services
Remote Access
Configure this feature to enable access of the Media
Hub over the Internet. The status of the remote access
feature and the Remote Device Name (if configured) are
displayed.
NOTE: Linksys offers Remote Access service
through www.ciscomediahub.com.
Configure Click this option to configure this feature.
Remote Access
• Enable Remote Access to the Media Hub
remote access of the Media Hub, select this option. (It
is disabled by default.)
If you enable the remote access feature, then configure
the Remote Device Name:
Remote Device Name
•
Name you want to assign to the Media Hub. It must
have between 4 to 50 characters and use only letters,
numbers, and dashes. (The Remote Device Name
cannot start or end with a dash.)
A period of Remote Access is included from date of activation.
†
Fees may apply thereafter and are subject to change. Go to
www.linksysbycisco.com for further information and details of terms
and conditions applicable to the Remote Access service.
†
To allow
Enter the Remote Device
47