Quick Install; Safety Information - Iomega 34337 - Home Media Network Hard Drive NAS Server Quick Start Manual

➊

Quick Install

NOTE: If you have purchased more than one Home Media Network Hard Drive, complete all steps on one before
setting up additional devices.
1. Use the included network cable to connect the network storage drive to your network router.
2. Connect the included power cord to the back of the network storage device and power outlet or
Uninterruptible Power Supply (UPS).
3. Your Home Media Network Hard Drive should power on automatically.
4. To install the Iomega Storage Manager software, insert the installation CD into your CD/DVD ROM drive in
your computer.
NOTE: The Iomega Storage manager is client software available on the included installation CD. Check the
support site at www.iomega.com/support for supported operating systems.
NOTE: For best results use a computer that is connected to the same router, hub, or switch as the Iomega
Home Media Drive. If the software doesn't run automatically, navigate to the CD drive on your computer and
double click the Setup icon.
5. Once the installation completes, the Storage Manager software will launch automatically.
NOTE: The Iomega Storage Manager will automatically scan your network when launched. If you receive a
message from Windows Firewall alerting you of network activity, click the Unblock button.
6. Once the Storage Manager software has found the Iomega Home Media drive, select your new device,
and then select Manage. Follow the Device Setup Wizard to configure the drive.
Configuring the Home Media Network Hard Drive
Click on the Iomega Storage Manager icon in the System Tray (Windows), Menu Bar (Mac), or select Iomega
Storage Manager from the applications list (most operating systems). Select your new device, and then select
Manage. The Iomega Home Media Console will open in a browser window. For additional configuration settings
and details, visit www.iomega.com/support or the Storage Manager help system.
Disconnecting the Drive
CAUTION: To prevent data loss, do not disconnect the drive during data transfer. The activity light on the drive
flashes when it is transferring data. Use caution when moving the drive while it is connected to power.
Backing Up with Your Drive
Iomega recommends periodic system backups and more frequent data backups to ensure that your critical data
is always protected. For complete setup instructions and more information on backup strategies, install the
software and select Help.
User's Manual
Visit www.iomega.com/support/home-media.html for a complete user's manual, additional configuration
instructions and latest software downloads.

Safety Information

Observe the following guidelines when using your Home Media Network Hard Drive:
1. Follow all instructions marked on the Home Media Drive and in the documentation.
2. Always use the appropriate power supply plug clip for your country.
2
➋ ➌