Table of Contents
Advertisement
How to Use the On Screen Menu
FUNCTION display
F1:MARKER
F2:WFM/VECTOR
F3:TWO WINDOW
F4:TIME CODE
F5:LEVEL METER
Audio level meter display
1
1
3
3
5
5
7
7
Channel
Level
display
display
Menu display
[MAIN MENU]
Displays instructions on menu
button operations.
16
XXXXX
2
2
4
4
6
6
8
8
0 dB line
(continued)
• Use the menu to open and set up functions.
• When "FUNCTION DISPLAY" (
ON, press any of the "FUNCTION1" to "FUNCTION5"
buttons to display the functions assigned to
FUNCTION buttons.
• This display disappears after 2 seconds of inaction.
• "XXXXX" indicates operating status (
"Functions displayed during FUNCTION button
operation").
• A white skeleton bar meter indicates the audio level
for SDI signals.
• You can switch the level display on/off and set the
number of displayed channels using the menu
(
page 38, "AUDIO").
• The 0 dB line and channel display can be switched
on/off from the menu (
• This is the menu display.
• It disappears after 2 minutes of inaction.
• You can change position of the display (
"MENU POSITION").
page 32) is set to
page 34,
page 38, "AUDIO").
page 29,
Advertisement
Table of Contents
