Logging Options
The IP560 supports an option for storing local system log files, as described in
Hard-Disk Drive for Logging"
Power Supply and Fan Unit
The power supply and fan unit are located at the rear of the IP560 appliance, as shown in
Figure
6.
Figure 6 Power Supply and Fan Unit Locations
Power Supply
The IP560 supports one power supply. The power supply is autosensing and can accept input
voltages between 47Hz-64Hz and 85VAC-264VAC. The power supply output is regulated to a
tolerance of ± 5 percent of the specified output voltage.
Figure 7 Power Supply, Fan, and Power Switch Locations
Power supply
For information about how to install or remove and replace a failed power supply, see
"Replacing a Power Supply"
The power supply status LEDs provide the status of the power supply as described in
IP560 Security Platform Installation Guide
on page 93.
Power supply
AC power receptacle
Integrated power supply
cooling fan
on page 104.
Logging Options
"Configuring a
Fan unit
Power supply switch
00353
00353
Table
5.
27