Denon DN-V1700 Operating Instructions Manual page 31

2 Label format
• Label lines may consist of any character strings of up to 8 characters beginning with a sharp ("#") (maximum 9 characters
including the "#").
• The sharp is omitted when specified as such parameters as "GOTO", "ONKEYGO", or "ONBREAK".
• The characters that can be used in label names are capital letters "A to Z", small letters "a to z" and numbers "0 to 9".
2 Parallel remote terminal
During script playback, parallel remote terminal pins 1 to 6, 11 and 12 function as keys 1 to 8, and can be used with the script
command "ONKEYGO", for example.
2 List of script commands
("n" refers to an integer)
Command @
01 comment
02 play
03 play standby
04 play start
05 end
06 pause
07 still
08 stop
09 audio control @
10 video control @
11 goto
12 vitc set @
13 wait
14 on key goto @
15 on SMPTE-tc goto @
16 if day of week goto @
17 on rtc goto @
18 on break goto @
19 osd display @
20 osd print @
21 osd attribute @
22 osd clear @
23 tc interrupt control @
24 rtc interrupt control @
25 com-port set @
26 com-port put @
27 parallel out set @
28 drive change
29 site command enable @
30 SNTP time calibration
31 still mode set @
32 variable set @
33 loop
34 write log file
"@" in the "@" column indicates commands for which "@" can be used.
Format
; Comment
Playback of 1 or 2 files. The script does not move to the next step unless the file is
PLAY
played to the file end
PLAYRDY Preparation for file playback
PLAYGO Start playback of file for which the play standby mode is set from the specified TC
END End/change script file execution
PAUSE Set pause mode (screen blacked out)
STILL Set pause mode (still picture displayed on screen)
STOP Stop playback (still picture displayed on screen)
AUDIO Switch audio output on and off
VIDEO Switch video output on and off
GOTO Forced change of command sequence
SETTC Set SMPTE time code
WAIT Wait specified number of seconds or until specified time code
ONKEYGO Set a forced change of command sequence at the time of key input
ONSMPTCGO SMPTE timer interruption
IFDWKGO Change command sequence according to day of week
ONRTCGO Real time timer interruption
ONBREAK Specify new processing position when an execution break command is received
OSDDISP Switch user OSD display on and off
OSDPRT Write 1 line of user OSD
OSDATT Set user OSD attribute
OSDCLR Clear line(s) of user OSD
TCINT Disable/enable time code interruption
RTCINT Disable/enable RTC interruption
COMSET Serial port communications mode setting
COMPUT Output 1 line from serial port
OUTPORT Parallel remote output terminal setting
DRV Change current drive
SITECMD Enable acceptance of site command
TIMECAL Time calibration by SNTP server
STLMODE Set screen display in still mode
SET Set loop counter value
LOOP Loop according to loop counter and label
WRITELOG Output log to file
Description
ENGLISH
31