Lexicon CP-1 - REV 2.0 Owner's Manual page 2

Digital audio environment processor
Table of Contents

Advertisement

Unpacking and Inspection
After unpacking the CP-1, save all packing materials in case you ever need to ship the unit. Thoroughly inspect
the CP-1 and packing materials for signs of damage. Report any shipment damage to the carrier at once; report
equipment malfunction to your dealer.
Precautions
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the
manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the
limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designated to provide
reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the
equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient the receiving antenna
Relocate the computer with respect to the receiver
Move the computer away from the receiver
Plug the computer into a different outlet so that the computer and receiver are on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find
the following booklet prepared by the Federal Communications Commission helpful:
"How to identify and Resolve Radio/TV Interference Problems."
This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.
This triangle, which appears on
your component, alerts you to
the presence of uninsulated,
dangerous voltage inside the
enclosure... voltage that may be
sufficient to constitute a risk of
shock.
Acknowledgement
The CP-1 is manufactured under license from Dolby Laboratories Licensing Corporation. Additionally licensed
under one or more of the following patents: U.S. numbers 3,632,886, 3,746,792 and 3,959,590; Canadian numbers
1,004,603 and 1,037,877. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
Copyright 1991
All Rights Reserved.
Patents are pending on the CP-1
Lexicon Part #070-06619 Rev. 2.0
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Lexicon, Inc., 3 Oak Park, Bedford, MA 01730 USA
Telephone: (781) 280-0300 Fax: (781) 280-0490
This triangle, which appears on
your component, alerts you to
important operating and main-
tenance instructions in this ac-
companying literature.
Printed in the United States of America
Lexicon

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-1

Table of Contents