About The Larc - Lexicon 300L - REV 1 Owner's Manual

300L Owner's Manual

About the LARC

Program Select
Press to enter Program
mode. Press repeatedly to
scroll through presets in a
bank.
Register Select
Press to enter Register
mode. Press repeatedly to
scroll through registers in a
bank.
Slider Display Line
Shows abbreviated names
of the parameters currently
under the control of the slid-
ers. Full name appears in the
Main Display.
Control Sliders
Adjust parameter values.
1-6
Main Display
Shows names and values for
all selections.
PROG REG
BANK SETUP STO CTRL MACH
VAR
Slider Display Keys
Show parameter name and
value in main display. Press
twice to engage vernier (fine)
adjustment mode when
available.
Headroom Indicator
+12 dBm indicates analog or
digital clipping. Proper input
level is with +12 dB and ovld
LEDs unlit .
L
-24 18 12 6 0 6 +12 ovld dB
R
1 2 3 4 5
6 7 8 9 0
MUTE ENTER PAGE
Lexicon
Numeric Keypad
Press one of these keys to
load a program selected with
PROG or REG. Also used to
select pages.
Function Keys
Bank scrolls through
groups of programs or reg-
isters.
SETUP brings you to the
tope level of the user inter-
face.
STO stores edited setups
and program registers.
CTRL toggles in and out of
the control mode.
MACH toggles between
machines when Split or
Cascade setups are se-
lected.
MUTE toggles the removal
and restoration of proces-
sed audio from the outputs.
ENTER loads selected set-
ups.
PAGE steps through pages
of setup and program pa-
rameters.