Yaesu FTDX9000 - DATA MANAGEMENT Operation Manual page 9

B
EFORE
There are 176 items in the Menu mode, and they are grouped; the group name is displayed at the left top of the
list screen. It will be convenient for you if you initially select the group, by rotating the Main Tuning knob, and
then select the item you want.
The groups are as follows.
1. AGC:
2. DISPLAY:
3. FH-2:
4. GENERAL:
5. MODE-AM, MODE-CW, MODE-DATA, MODE-
DM, MODE-PKT, MODE-RTTY, MODE-SSB
6. RX AUDIO:
7. RX DSP: RX Filter bandwidth and shaping
8. SCOPE: Setup of the starting frequency for the
Spectrum Scope
9. TUNING: Setup of the Dial steps
10.TX AUDIO: Setup of the Parametric Equalizer
11.TX GNRL:Setup of the
For detailed information regarding the Menu mode,
please see the "How to Use the Menu Mode" sec-
tion of this manual, and the operation manual of the
radio.
It is possible to reset (only) the Menu mode set-
tings back to their factory default. Do this if you
want to clear all settings out, and start fresh with
the original values.
1. Turn off the radio.
2. Turn the radio on while pressing and holding
in the [ MNU ] key.
FT 9000MP/C
DX ONTEST
U
SING AN
A M M
BOUT ENU ODE
M M
ENU ODE
D M
ATA ANAGEMENT
E
XTERNAL
O
PERATION
R
ESET
POWER switch
O M
PERATION ANUAL
M
ONITOR
MNU
Page 5