Set (Local-Time1) Setup; Format (Time Format) Setup - Yaesu FTDX9000 - DATA MANAGEMENT Operation Manual

H U
OW TO
Please see the "PLEASE READ THIS FIRST" information.
This procedure lets you choose between 12-hour and 24-hour time display format.
1. While the World Map is displayed, press [ 2/
3.5 ]( FORMAT ) key to select TIME FORMAT.
2. Press the [ 1/1.8 ]( ) , [ 2/3.5 ]( ) , [ 3/5 ]( ) , [ 4/7 ]( )
key, and select 12-hour or 24-hour display for LO-
CAL-TIME1, CLOCAL-TIME2, and the WORLD
CITY LIST.
When SEC is set to "ON", the "seconds" digits
will be shown at the top right corner of the TFT
screen, in the Local Time indication area.
Advice: If you press [ 6/14 ]( SECADJ ) key, the
"seconds" indication will reset to "00." Use this to
sunc your clock to a time standard such as WWV.
3. When all settings are complete, press and hold
in [ 7/18 ]( SELECT ) key for 2 seconds to exit.
Page 10
W
SE THE
SET ( LOCAL-TIME1 ) S
FORMAT ( TIME FORMAT ) S
FT 9000MP/C
DX ONTEST
C
ORLD LOCK
ETUP
ETUP
"TIME FORMAT" Select
"SELECT" Keys
D M
ATA ANAGEMENT
Set to "00" Second
O M
PERATION ANUAL