Manual Search; Programmed Play - Denon DCM-27 Operating Instructions Manual

ENGLISH
Operation
REPEAT
[NUMBER]
(0~9, +10)
[DIRECT]
[DISC SELECT]
RANDOM
[DISPLAY]
1
[ ]
6
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Manual search

< / >
7 9
Use this function to skip forward or backward while listening to the
< / > sound.
8 6 1
¢ Searching forward:
[
Press 7
playback.
• " "is displayed if the end of the last track is reached during
manual searching. If this happens, use
turn the display off.
RANDOM
5
¢ Searching backward:
[
Press 6
5
playback.
• " " is displayed if the beginning of the first track is reached
during manual searching. If this happens, use [
<
/
7 9
[ CLEAR ]
[ CALL ]
NOTE:
[ PROGRAM ]
• The sound may be interrupted momentarily when resuming
[ A-B ]
normal playback from the manual search mode. This is not a
REPEAT
malfunction.
[ ]
7
< >
]
or press and hold 7 / 9
[ ] <
6 or 8
< >
]
or press and hold 8 / 6
>
to turn the display off.
9
ENGLISH

Programmed play

You can play certain tracks on the loaded discs in any order.
Up to 32 tracks can be set in a program.
1
[PROGRAM]
Press .
• The "PROGRAM" indicator lights.
during
2
[DISC SELECT] [NUMBER]
Press ,
be programmed.
>
/ 6 to
Example: To program the 3rd track on the 2nd disc and the 12 track
on the 5th disc:
Press [PROGRAM] [DISC SELECT] [2] [3], [DISC SELECT] [5]
[+10] [2].
3
during
Press 1 .
• The tracks are played in the programmed order.
] or
7
¢ Checking the programmed tracks:
Press [CALL].
The tracks are displayed in the programmed order each time the
button is pressed.
¢ Clearing tracks from the program:
Press [CLEAR] while the track you want to clear is displayed during
the "Checking the programmed tracks" operation above.
¢ Stopping programmed playback:
Press [DIRECT] or press 5 to open the disc tray.
• Tracks on a disc not loaded can also be programmed, but if you try
to play that disc, the microprocessor detects that it is not loaded and
the following disc is played automatically.
• When programming, do not program a track number which is not
recorded on the disc. If such a number is programmed by mistake,
the player ignore the program.
• For programmed playback, the remaining time for the program is
only displayed when the programmed tracks are all on the same
disc.
"– – : – –" is displayed when tracks on more than one disc are
programmed.
• In the case that the total playing time of programmed tracks
becomes more than 99:59, "– – : – –" is displayed.
Operation
to select the disc to