U
This is the screen which displays the transceiver's memory channels. On the list, the channel number, ID tag,
frequency, and operating mode are shown. The FT
may be arrayed into up to six groups, and you can check the entire memory system's status by viewing this
screen.
E
XPLANATION OF THE
[ F2 ]( LOAD )
Press this key to load memory data previously
saved on the CF card to the transceiver.
[ F3 ]( SAVE )
Press this key to save the current memory data to
the CF card.
[ F5 ]( MASK/RESTROKE )
It is possible to erase the currently-selected
memory channel's data by pressing this key. If
you want to restore the erased memory data, press
this key again after erasing the memory.
FT
9000 TFT O
DX
SING THE
A
M
BOUT THE
F
K
UNCTION
EYS ON THE
M
PERATION
ANUAL
M
EMORY
C
EMORY
HANNEL
9000 has an extensive memory system of 99 channels that
DX
M
EMORY
[ F6 ]( )
Use this key to move the highlighted field on the
memory list downward.
[ F7 ]( )
Use this key to move the highlighted field on the
memory list upward.
[ DISP ]( DISPLAY )
Press this key momentarily to move to the World
Clock page.
Press and hold this key in for two seconds to re-
vert to the Rotator Control page.
C
HANNEL
L
IST
C
L
S
HANNEL
IST
L
IST
CREEN
Page 39