Installation procedure
To ensure correct operation, tick off every item when the action has been carried out.
Install the colour display as described the applicable documentation provided
1
with the unit.
• The display unit must be located so that it is best protected from glare which
reduces readability.
• The display may be mounted in a panel, on the desktop or bulkhead, or overhead.
• Make sure that adequate ventilation is available to avoid overheating.
• The compass safe distance must be allowed for when planning the unit's location.
• Ensure that the installation allows for the physical movements and forces
normally experienced on a vessel.
• Ensure that enough space is provided for maintenance work.
343522/A
Installation procedures
25