Table of Contents
Advertisement
Installation
Start the computer. Make sure VideoMate U100 is connected to your computer
and insert the installation CD into your CD drive.
Step 1. Windows will detect a new device and start the Add/Remove
Hardware Wizard. Please press Cancel and go to the next step.
Step 2. Insert the installation CD into your CD drive. If you have Autorun
enabled, the installer will start automatically. (If Autorun is disabled,
double-click on "setup.exe" on the installation CD.) You can choose
Complete to install all necessary software (VideoMate U100 drivers,
ComproDTV4, or choose Custom to select item by item. Compro
recommends you choose Complete.
Step 3. After each program is successfully installed, press Finish to proceed.
Step 4. When installation completes, press Finish to restart computer.
Step 5. Connect TV signal.
Step 6. Open ComproDTV to enjoy the show.
6
Advertisement
Table of Contents
