User Utilities - DigiTech VOCALISTWEX Manual

Note: The Data up
and down parame-
ters allow you to
duplicate the Data
Wheel using your
footswitch.

User Utilities

¥ Song up
¥ Song down
¥ Song Step up
¥ Song Step down
¥ Data up
¥ Data down
The default switch assignment for the FS300, from left to right, is
Program up Program down
To change the assignment of a footswitch button:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Foot softkey; this presents the Footswitch Controls sub-
menu.
3. Press the softkey corresponding to the footswitch button to be reas-
signed, either left, center or right.
4. Use the Data Wheel to select the desired footswitch action.
5. Repeat steps 3 and 4 for other button assignments, if desired.
6. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
The User Utilities allow you to select between eight different levels of
LCD display contrast, and to enable or disable voice editing of harmony
intervals. Voice editing of harmony intervals needs some explanation:
when editing the voicing interval or customizing a harmony style, you
have the option of entering the note with the Data Wheel or by actually
singing the note. The Vocalist Workstation EX will recognize the note
and you will see the display change to the note you have just sung.
To change the LCD display contrast:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the User softkey.
3. Use the Data Wheel to select the desired contrast level.
4. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
(Sng )
(Sng )
(Stp )
(Stp )
(Dat )
(Dat )
Bypass.
47