Back Panel - DigiTech VOCALIST VR Manual

1 2 3
Input Level Knob adjusts the input level for the microphone and line inputs.
Input Level Knob adjusts the input level for the microphone and line inputs.
The Signal LED guides you to an optimal level setting. The LED lights in three colors.
The Signal LED guides you to an optimal level setting. The LED lights in three colors.
• Green is displayed when VOCALIST VR can recognize the pitch of your voice
Green is displayed when ACCESS can recognize the pitch of your voice
Orange is displayed when ACCESS is generating optimal signal to noise. • Orange is displayed when VOCALIST VR is generating optimal signal to noise.
Red is displayed when ACCESS is just below clipping-causing ugly digital distortion • Red is displayed when VOCALIST VR is just below clipping-causing ugly digital
distortion
4
5 6
Line Input accepts mono line level audio from an external source. This jack overrides
Line Input accepts mono line level audio from an external source. This jack overrides
the front panel MIC jack.
the front panel MIC jack.
AUX Input to Reverb bypasses the harmony processing and routes the AUX signal
AUX Input to Reverb bypasses the harmony processing and routes the AUX signal
directly to the reverb effect. This feature allows you to 'borrow' VOCALIST VR' reverb
directly to the reverb effect. This feature allows you to 'borrow' ACCESS' reverb effect
effectfor other instruments that don't need harmonies. The input accepts mono line level
for other instruments that don't need harmonies. The input accepts mono line level
audio from an external source.
audio from an external source.
Left and Right Outputs are the main mix outputs. The outputs have a selectable output
Left and Right Outputs are the main mix outputs. The outputs have a selectable output
level using the level switch beside the outputs - +4dBu or -10dBu. Use the switch to
level using the level switch beside the outputs - +4dBu or -10dBu. Use the switch to
match the output of VOCALIST VR to your mixer. For mono output use the left out-
match the output of ACCESS to your mixer. For mono output use the left output on its
put on its own.
own.
MIDI thru/out/in are used to control VOCALIST VR with an external MIDI device. MIDI
MIDI thru/out/in are used to control ACCESS with an external MIDI device. MIDI IN
IN receives MIDI information. MIDI THRU transmits an exact copy of any MIDI informa-
receives MIDI information. MIDI THRU transmits an exact copy of any MIDI informa-
tion received at the MIDI IN.
tion received at the MIDI IN.
Footswitch input is used to connect a Digitech FS-300 footswitch to provide remote
Footswitch input is used to connect a Digitech FS-300 footswitch to provide remote
control of Bypass, Reverb on/off, and 'ALTernate' Key. See page18 for more informa-
control of Bypass, Reverb on/off, and 'ALTernate' Key. See page18 for more informa-
tion).
tion).
Power input is used only with a Harman Pro Group PS750 9.75V AC, 820mA power
Power input is used only with a Harman Pro Group PS750 9.75V AC, 820mA power
adapter supplied with the unit.
adapter supplied with the unit.
VOCALIST VR
VOCALIST VR
5