Detuners; Whammy - DigiTech VALVEFX Owner's Manual

Valve FX Owner's Manual

DETUNERS

WHAMMY™

Pitch Shft Amount..........Sets the interval of semitones between the
original note and the pitch shifted note.
Variable from -24 to +24 (4 octaves).
Pitch Detune..................Determines the amount of detuning applied to
the shifted note. Variable, in cents, from -100
to +100.
Pitch Tracking ...............Controls the sound quality/tracking speed of
the pitch shifted material. This control should
be set in relation to the Pitch Shift Amount or
the interval setting. There are 10 different
tracking settings, and some overlap of inter-
vals is provided to help you find the sound
that works best for you more quickly. The
final judge of this setting should be your ears.
Pitch Regenerate ..........Controls the amount of pitch shifted material
that is fed back to the input of the pitch
shifter. High regeneration settings produce
interesting unnatural sounds. Varies from -
99% to +99%.
Detune On / Off .............Turns the Module on or off. When Modules
are turned off, their Parameters disappear
from the Parameter menu. To see the
Parameters, you must turn the Module on.
Detune Predelay ...........Sets the amount of time, up to 100 ms, before
the detuned note is heard.
Detune Amount .............Controls the amount of detuning. Variable, in
cents, from -99 to +99.
Effect On / Off ...............Turns the Module on or off. When Modules
are turned off, their Parameters disappear
from the Parameter menu. To see the
Parameters, you must turn the Module on.
Whammy Function ........Selects the function of the Whammy Module.
There are 16 functions available in regular
Whammy Modules. They are as follows:
SHALLOWDETUNE, DEEP DETUNE, 1
OCTAVE ABOVE, 2 OCTAVES ABOVE, 2ND
BELOW, 1 OCTAVE BELOW, 2 OCTAVES
BELOW, 2NDABV- 3ABV, MIN3AB-MAJ3AB,
3RDABV-4THABV, 4THABV-5THABV,
5THABV-6THABV, 5THABV-7THABV,
4THBLW-3RDBLW, 5THBLW-4THBLW, AND
12BELOW-12ABV.
35
Section 4 - Effects and Parameters