Footswitch Utilities - DigiTech STUDIOVOCALISTEX Manual

Footswitch Utilities

Note: The Data up
and down parame-
ters allow you to
duplicate the Data
Wheel using your
footswitch.
To initialize all programs, styles and songs (factory
initialization):
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Init softkey; this presents the Initialize Utilities sub-menu.
3. Press the softkey corresponding to All.
4. Press the Store button. A warning tells you that all user programs,
songs and styles will be lost. To cancel the factory initialization,
press the Exit button; otherwise, press the Store button to perform
the initialization. During the initialization process the version screen
will appear; when initialization is complete, factory program F 1 will
be loaded and the unit is ready to use.
The Studio Vocalist EX Footswitch Utilities allow you to reconfigure the
functions of the DigiTech FS300 3-button footswitch to meet your per-
sonal preferences.
Any button on the FS300 can be configured to control:
• Bypass Latching
Bypass Momentary
•
• Program up
• Program down
Song up
•
Song down
•
Song Step up
•
Song Step down
•
Data up
•
• Data down
The default switch assignment for the FS300, from left to right, is
Program up Program down
To change the assignment of a footswitch button:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the Foot softkey; this presents the Footswitch Controls sub-
menu.
3. Press the softkey corresponding to the footswitch button to be reas-
signed, either left, center or right.
(BypL) bypass is activated when the
footswitch is pressed and released, stays acti-
vated until the footswitch is pressed and
released again.
(BypM) bypass activated only while
footswitch is held down.
(Pgm )
(Pgm )
(Sng )
(Sng )
(Stp )
(Stp )
(Dat )
(Dat )
Bypass.
47