DigiTech STUDIOVOCALISTEX Manual page 45

Note- Studio Vocalist EX
and Vocalist Workstation
Compatibility: You may
perform single program
dumps between these two
products only. The bulk
dump feature will not work.
To dump a single program to an original
Studio Vocalist (non-EX):
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu.
3. Press the softkey corresponding to Dump.
4. Press the Right Arrow button once. The display will read " Press
[Store] to dump SV V1.0 program.
5. Use the Data Wheel to select the desired program to dump
6. Press the Store button to dump the program; the unit will display
"Dumping...completed" after about one second to indicate that the
dump is finished.
7. Press the Utilities button once again to exit; this will return you to
the mode from which you entered.
To dump all programs (bulk dump) to another
Studio Vocalist EX:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu. If
you are dumping all programs to a sysex librarian, ensure that the
librarian is ready to receive a sysex dump.
3. Press the softkey corresponding to Dump.
4. Press the Right Arrow button twice.
5. Press the Store button to dump all programs; the unit will display
"Dumping..." while the dump is in progress. When the dump has
been transmitted in full, the unit will display "Dumping...completed".
The time required to perform a bulk dump will vary with the number
of programs, styles and songs stored in the unit at any given time.
Typically, a bulk dump will take about ten seconds to complete.
6. Press the Utilities button once again to exit; this will return you to the
mode from which you entered.
To dump a single song to another Studio Vocalist EX:
1. Press the Utilities button from any mode; this presents the
UTILITIES main menu.
2. Press the MIDI softkey; this presents the MIDI Utilities sub-menu. If
you are dumping the song to a sysex librarian, ensure that the librari-
an is ready to receive a sysex dump.
3. Press the softkey corresponding to Dump.
4. Press the Right Arrow button three times.
5. Use the Data Wheel to select the desired song to dump.
6. Press the Store button to dump the song; the unit will display
"Dumping...completed" after about one second to indicate that the
dump is finished.
7. Press the Utilities button once again to exit; this will return you to the
mode from which you entered.
43