Getting Started; Making Connections; Mono Operation - Amplifier - DigiTech RP90 Owner's Manual

Getting Started

Making Connections

There are several different connection options available with the RP90. Before connecting the
RP90, make sure that the power to your amplifier and the RP90 is turned off. There is no power
switch on the RP90. To turn the RP90 on or off, connect or disconnect the included PS200R
power supply from the Power Input jack.

Mono Operation - Amplifier

Connect your guitar to the Input of the RP90. Connect a single mono instrument cable from the
Left (Mono) output of the RP90 to the instrument input or effect return on your amplifier. Set
the Amp/Mixer switch to Amp.
NOTE: When using a
guitar amp, it may be best to
connect the Output of the
RP90 to the effect return of
the amplifier.
Guitar Amp Input/
Effect Return
Left (Mono)
Input
Output
Amp/Mixer
switch set to
Amp.
13