Factory Reset - DigiTech RP80 User Manual

c1-c9 – Clean Tube – British 4x12 Cabinet
s1-s9 – British Stack – British 4x12 Cabinet
U1-U9 – Crunch – Vintage 4x12 Cabinet
G1-G9 – High Gain Tube – British 4x12 Cabinet
F1-f9 – Fuzz – British 4x12 Cabinet

Factory Reset

This function resets the RP80 to its original factory settings.This procedure erases all
custom user presets. Performing this function erases all user-programmed data.
All such data will be lost forever!
The procedure for performing a Factory Reset is as follows:
1. Disconnect the power supply from the RP80 (AC Power) or unplug the guitar from the
input jack (battery power).
2. Press and hold the left EDIT button while re-connecting the power or plugging your
guitar into the RP80's input.
3.When the display reads --, release the button and press the STORE button. The display
reads rE. The RP80 is now restored to its factory settings.
24