Pitch Shifter; Whammy (Bend) - DigiTech RP 3 User Manual

Section - 4 Effects and Parameters
This RP-3's Pitch Shifting effect gives you a shifted signal from 0 to 24 semi-tones above or -12 semi- tones below the pitch of the input signal.
Amount
Key/Bend
The RP-3's pitch bending effect allows you to smoothly shift between two preset pitch intervals using the Expression Pedal.
Amount
Key/Bend
14
Pt (Pitch Shifting)
Values Displayed Values
- 1 2 . . . 0 . . . 2 4
Amount
- 1 5 . . . 0 . . . 1 5
Key/Bend
Sets the interval between the original note and the pitch shifted note. Variable from -12 to 24.
Determines the amount of detuning applied to the shifted note. Variable from -15 to 15.
bd (Pitch Bending/Whammy)
Values Displayed Values
1 . . . 1 6
Amount
0 . . . 9 9
Key/Bend
Selects the function of the Whammy™ module. There are 16 bend ranges available in the Whammy
module. They are as follows:
1=Up 1 Octave
2=Up 2 Octaves
3=Down 2nd Reversed
4=Down 2nd
5=Down 4th
6=Down 1 Octave
7=Down 2 Octaves
8=Down 6 Octaves
This Parameter is a manually selectable bend amount of the Whammy™ effect. As it is modified, the pitch
of the original note will change in intervals according to the setting of the Amount parameter. Ranges
from 0 to 99.
9=Down 1 Oct - Up 1 Oct
10=Down 4th - Down Minor 3rd
11=Up 5th - Up 6th
12=Up 4th - Up 5th
13=Up Minor 3rd - Up Maj 3rd
14=Up 2nd - Up Maj 3rd
15=Down 4th - Up 5th
16=Up 5th - Octave Up
RP-3
User Guide