Section 1 - Startup; Front Panel Controls And Functions; Program Switches; Program / Bank Selector - DigiTech C1 Owner's Manual

Section 1 - Startup

Section 1 - Startup

Front Panel Controls and Functions

The front panel of the Control One consists of a 20 character vacuum-fluorescent display, ten programmable
footswitches, a dedicated bypass footswitch, a Select switch, and the built-in continuous controller pedal.
• Program Switches - Each programmable switch has a number (0-9) and can be programmed to function
in one of several ways.
• Bank Up/ (Hold) Tuner switch (2112 only) - This switch lets you move up through the Bank menu
and select Banks simply pressing the footswitch once. Successive presses will move down to the next
Bank. When the desired Bank is reached, press any of the flashing footswitches and the selected Bank
will be activated. When you press and hold the footswitch, the Control One will put the 2112 in Tuner
mode.
• Bank Down/ (Hold) Bypass switch (2112 only) - This switch lets you move down through the Bank
menu and select Banks simply pressing the footswitch once. Successive presses will move to the next
bank. When the desired banks is reached, press any one of the flashing footswitches and the selected
Bank will be activated. When you press and hold the footswitch, the Control One will put the 2112 in
Bypass mode.
• Program / Bank / Tuner Selector (Included decal for 2101, Valve FX or Legend II) - The Select
switch allows you to switch Banks or to randomly select any Program number for instant recall. This
also allows access to the tuner on the GSP-2101 and Valve FX by pressing the switch three times.
• Bypass Switch (Included decal for 2101, Valve FX or Legend II) - The Bypass switch, when active,
passes the input signal directly to the output(s) of the GSP-2101, Valve FX or Legend II, effectively
bypassing all currently operating effects (including analog effects).
• Continuous Control Pedal - Real-time control of any Parameter in the 2112 SGS, GSP-2101, Valve
FX or Legend II can be accomplished using the built-in continuous controller pedal (and / or an exter-
nal CC pedal). For complete information on Continuous Controller assignments, please refer to the
original Owner's Manual shipped with the 2112 SGS, GSP-2101, Valve FX or Legend II.

Rear Panel Connections

The rear panel of the Control One consists of the control output (for use with the 2112 SGS, GSP-2101,
Valve FX or Legend II only) and an external continuous controller input if more than one CC pedal or source
is desired.
4
Control One Owner's Manual