Installation Procedures; Installation Summary; Installing The Provider - HP 201723-B21 - StorageWorks Modular SAN Array 1000 Hard Drive Administration Manual
Hp modular smart array fc vds hardware provider administration guide (t1634-96072, may 2006)
Hide thumbs
Also See for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive:
- Maintenance and service manual (122 pages) ,
- Reference manual (48 pages) ,
- Release note (13 pages)
Table of Contents
Advertisement
Installation procedures
The following procedures describe how to install the Hardware Providers on a Windows 2003 server.
If you have not already configured the server and the array as instructed in "Chapter 2 Configuration,"
do so now before you install the HP Provider software. The HP Provider will not work if the array and
server have not been correctly configured before you install the Provider.
Installation summary
You will perform the following tasks on the Windows server during installation:
•
Remove the previous version of the Provider, if necessary.
•
Run the Provider installation executable: setup.exe.
•
Follow the InstallShield Wizard instructions to install the software.
•
Install Microsoft QFEs (quick fixes), if any. See the Provider READMEfile for details.
•
Verify installation using Windows Disk Management and the DISKRAID List Provider command.
Installing the Provider
Follow these steps to install the HP VDS Hardware Provider on a Windows 2003 server. To stop
installation at any point during this procedure, click Cancel:
1.
Insert the Provider installation CD and double click the Provider executable:
setup.exe
The Preparing to Install window appears, followed by the install Welcome screen.
24
Installation
Advertisement
Table of Contents
Troubleshooting
