Beam Pictures To Another Clie Handheld; Preparations; Beam A Picture; Selecting A Picture - Sony PEG-S360 - Personal Entertainment Organizer Operating Instructions Manual

Advanced Functions of
3
PictureGear Pocket

Beam Pictures to Another CLIE Handheld

PictureGear Pocket helps you to send pictures to the PictureGear
Pocket application of another CLIE handheld using Infrared (IR)
communication.

Preparations

Turn on IR communication of both sending and receiving CLIE
handhelds. Check whether the IR ports of the sending side and
receiving side are positioned properly so that communication is
possible between them. Place both CLIE handhelds units so that
their IR ports are facing each other. The distance between them is
4 ~ 8 inches (10 ~ 20 cm). There should be no obstruction between
these units. Make sure that PictureGear Pocket is installed in both
receiving and sending devices to receive and send data. The
optimal data transfer distance may differ depending on the
operational relation between the CLIE handhelds. Change the
distance if necessary and try the procedure again.
Start the PictureGear Pocket application of the sending side CLIE
handheld.

Selecting a picture

Switch PictureGear Pocket of the sending side to the selection
mode ([Preview Mode] or [List Mode]) and select a picture to be
transferred.
Reference: 2.2 "Selecting a picture in [Preview Mode]," 2.3 "Selecting a picture in [List Mode]."

Beam a picture

After switching the screen to [Full Screen Mode], tap the menu and
then click the [Beam] icon. PictureGear Pocket detects the receiving
side CLIE handheld and starts beaming the picture if
communications are possible.
[Beam] icon
Do not move the CLIE handheld units until the picture is transferred.
After the picture is to beam, the sending side CLIE handheld returns to the status
before the sending operation. The receiving side CLIE handheld displays the received
picture in [Full Screen Mode].
3.2
Search Receiving
You can only use the infrared
data transfer function if
picture files are stored in the
CLIE handheld. If pictures are
stored on a "Memory Stick,"
you cannot use this function.
Receiving
Side
Sending
Side
You can transfer only one
picture at one time. You
cannot transfer multiple
pictures.
Even if PictureGear Pocket of
the receiving side CLIE
handheld is not started when
the picture is received, the
CLIE handheld still receives
the picture. In this case, start
PictureGear Pocket after
receiving the picture. You can
display the received picture in
[Full Screen Mode].