Control Panel - Cuisinart Coffee On Demand DCC-3000 Instruction Booklet

CONTROL PANEL

1. Coffee gauge
™
Displays amount of brewed coffee
remaining in unit .
2. Clock display
Displays time of day and Auto On and Off times .
3. Hour and minute Buttons
For use in setting hour and minute for time
of day, Auto On time, and Auto Off time .
4. function Knob
a. auto on
The Auto On setting programs the coffeemaker
to turn on at the time selected, up to 24 hours in
advance . See "Program" below for instructions
on setting time .
b. auto off
The Auto Off setting lets you program coffee-
maker to shut off 0 to 4 hours after brew cycle
ends . Holds selected time until you change it .
c. program
The Program function is used to set the Auto On
time . Select brew start time with hour and min-
ute buttons – LCD displays "PM" for afternoon
and nighttime brew starts . Holds selected time
until you change it .
d. Brew
The Brew function is used to start the brew
cycle directly .
e. Clock
Used to program the time of day .
5. audible tone (not shown)
An audible tone sounds 5 times when the coffee
has completed brewing .
6. auto on Indicator Light
7. Clean Setting
Indicates time to clean coffeemaker to remove
calcium buildup .
8. 1–4 Cup Setting
Improves extraction, flavor and temperature when
brewing fewer than 5 cups .
9. on/off Button
Used to turn your coffeemaker on and off . Unit
must be on to program functions .
1
2
3
6
4a
4c
7
9
5
4e
4d
4
4b
8