Variable Sequential Pictures - Polaroid Spectra User Manual

Select the 12 second setting by pressing
4
the button once again. The
MODE
number of pictures left in the film pack
will start flashing:
If the number of pictures left in the film
5
pack is the number of pictures you want
to take, press the
you want to take fewer pictures, press
the down ( ) control button. When the
number you want is displayed (for
example, 4) press the
to return to the full display:
Be sure your subject is correctly framed
6
in the viewfinder. Now press and release
the shutter button. The camera will
automatically begin taking the series of
pictures.
Note: The display disappears about every 40 seconds. Lightly press
the MODE or shutter button to make it reappear.
button once. If
MODE
button once
MODE
If you wish to interrupt the series, press
the self-timer button.
To return the camera to fully automatic
operation, press the Auto reset button.
Note: When you use the 12 second
setting to get into the picture, 12 seconds
will pass before the first picture is taken.
The time between the other pictures will
be only 6 seconds. The camera will beep
and the red indicator on the front of the
camera will flash as described in the
section the Se/f-timer

Variable sequential pictures

This feature allows you to preset the
camera to whatever interval you want.
For example, you can take 4 pictures and
program the camera to take them 30
seconds apart with one press of the
shutter button.
To take variable sequential pictures:
Press the button until you see only
1 MODE
the sequential pictures symbol:
Features 15