Linksys WRV210 - Wireless-G VPN Router Quick Install Manual page 9

Section 2: Router Configuration
Static IP If the ISP assigns
you a static IP address,
select Static IP from the
drop-down menu.
Complete the Internet
IP Address, Subnet Mask,
Default Gateway, and DNS
fields.
Enter at least one DNS
address.
PPPoE If you are
connecting through PPPoE,
select PPPoE from the
drop-down menu.
Complete the User Name
and Password fields.
PPTP PPTP is a service
used in Europe only. If
you are using a PPTP
connection, check with the
ISP for the necessary setup
information.
L2TP L2TP is used mostly
in Europe. Check with the
ISP for the necessary setup
information.
Heart Beat Signal
Heart
Beat Signal is a service
used in Australia.
Check with the ISP for
the necessary setup
information.
Wireless-G VPN Router with RangeBooster 9