Linksys WRV210 - Wireless-G VPN Router Quick Install Manual page 5

Installation
Before you begin, make sure that you have the setup informa-
tion for the specific type of Internet connection. The installation
technician from the ISP should have left this information with
you after installing the broadband connection. If not, you can
call the ISP to request the settings.
Make sure that all of the
A.
network hardware is
powered off, including the
Router, PCs, and cable or
DSL modem.
Connect one end of an
B.
Ethernet network cable to
one of the LAN ports
(labeled 1-4) on the back of
the Router, and the other
end to an Ethernet port on
a PC.
Repeat Step B to connect
C.
more PCs, a switch, or
other network devices to
the Router.
Connect a different
D.
Ethernet network cable
from the cable or DSL
modem to the Internet
port on the Router's back
panel.
Power on the cable or DSL
E.
modem.
Wireless-G VPN Router with RangeBooster
1
5