Unpacking The Access Point; Package Contents - Cisco AIR-AP1230B-A-K9 - Syst. 1230 Aironet WLAN AP Hardware Installation Manual

Unpacking the Access Point

Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
Read the installation instructions before you connect the system to its power source. Statement 1004
Warning
Warning This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
the protective device is rated not greater than: 20A Statement 1005

Unpacking the Access Point

Follow these steps to unpack the access point:
Open the shipping container and carefully remove the contents.
Step 1
Step 2 Return all packing materials to the shipping container and save it.
Step 3 Ensure that all items listed in the "Package Contents" section are included in the shipment. Check each
item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative.

Package Contents

Each access point package contains the following items:
•
•
•
•
•
The optional 2.4-GHz radio upgrade kit is shipped with the following items:
•
•
•
•
•
The optional 5-GHz radio upgrade kit is shipped with the following items:
•
•
•
•
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
2-3
Cisco Aironet 1200 Series Access Point or Cisco Aironet 1200 Series Lightweight Access Point
Cisco Aironet 1200 Series Power Module (Universal power supply)
Product quick start guide
Translated safety warnings document
Cisco product registration and Cisco documentation feedback cards
2.4-GHz radio card (802.11g)
Installation guide
A product registration card
A T-10 tamper-resistant Torx L-wrench
2.4-GHz radio product compliance label
5-GHz radio module (RM21A or RM22A)
Installation guide
A product registration card and a 5-GHz radio product compliance label
A T-10 tamper-resistant Torx L-wrench
Chapter 2 Installing the Access Point
OL-8370-04