Embroidering Small Areas; Sewing Designs; How To Select A Built-In Design - ELNA 8200 Instruction Manual

Designs
Hoop Size A(F): 126 110mm
X
1 2
5 6
Mode
Ready to Sew
1
30 min
Size
P
2
1
GS
Snow Seashell
Gray
White
q
3 4
A Z
7 8
Edit
2
5 colors
109x84mm
A(F): 126x110mm
A Z
3 4
Green
Dust
Edit
Jog
Mode
ST
w

Embroidering Small Areas

Attach stabilizer (cut larger than embroidery hoop)
to small piece of fabric. Draw centerline and place
stabilizer in hoop.

Sewing Designs

How to Select a Built-In Design

The built-in designs have been organized by
recommended hoop size (A or B) and subject
matter (animals, floral, ocean life, etc.).
To select a design, touch the key that represents
the design you desire.
Hoop size warning message appears. Touch
"Return" key.
The ready to sew window opens. The LCD touch
screen now shows the design information like the
image, thread colors, sewing time, etc.
q
Color/Part key
The design is separated into parts based on
thread color changes. The parts are sewn in
the order displayed. Thread color names and
numbers are shown based on your thread
brand preference (see page 13). The part that
will be sewn is darkened.
After a part is sewn, the machine will
automatically stop and the next color part key
will darken. Change thread to next color and
continue sewing.
How to Sew a Specific Part (Skipping)
You can eliminate parts of the design by
touching the "Color/Part" key previous to the
part you wish to sew. All parts located before
that color/part key will lighten.
w
Next key
This key will be displayed if there are more
parts to the design. Touch the key to view the
other parts.
26