Working With Autocad - Wacom INTUOS 3 User Manual

WORKING WITH AUTOCAD

AutoCAD can support the Intuos3 tablet as a Windows system pointing device or as a Wintab compatible
digitizer. By default, AutoCAD is configured to use Intuos3 as a system pointing device. If you will be using
Intuos3 with tablet menus or to digitize drawings to proper scale, you will need to follow the procedures
below.
Note: To configure the lens cursor or mouse for left handed use in AutoCAD or similar applications, open the
Wacom Tablet control panel, click on O
CONFIGURING AUTOCAD FOR A WINTAB COMPATIBLE DIGITIZER
1. Start AutoCAD. Open the T
2. From the O
PTIONS
3. Under C P
URRENT OINTING
4. Decide from which device AutoCAD will accept input. Choose an option from the A
section:
• D O
IGITIZER NLY
• D M
IGITIZER AND
mouse.
5. Click OK to close the O
Contents
PTIONS
menu and select O
OOLS
window, select the S
YSTEM
D , select the Wintab compatible digitizer option.
EVICE
. The AutoCAD drawing editor only accepts input from Intuos3.
. The AutoCAD drawing editor accepts input from both Intuos3 and your
OUSE
window.
PTIONS
Contents
Index
... and select L in the H
EFT
.
PTIONS
tab.
Index
group.
ANDEDNESS
I
CCEPT NPUT
76
F
ROM
76