Configuring Your Card To Use Security - Belkin F5D8071 User Manual

Using the Belkin Wireless Networking Utility Using the Belkin Wireless Networking Utility

Configuring your Card to use Security

At this point, you should already have your wireless router (or access
point) set to use WPA or WEP. In order for you to gain wireless
connection, you must set your N1 Wireless ExpressCard to use the
same security settings.
Changing the Wireless Security Settings
The Belkin N1 Wireless ExpressCard supports the latest WPA security
feature as well as the legacy WEP security standard. By default,
wireless security is disabled.
To enable security, you will first must determine which standard
is used by the router (or access point). (See your wireless router's
or access point's manual for directions on how to access the
security settings.)
To access the security settings on your Card, click the "My Connections"
tab and point to the connection for which you want to change security
settings. Click "Edit" to change settings.
22 22