Ap Array - D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual

Section  - Configuration
The AP Array window allows users to create a set of devices on a
network that are organized into a single group in order to increase
ease of management. Once a user has made the desired settings,
click the Save button to let the changes take effect.
Enable AP Array:
Check this box to enable the AP array function. The
three modes that are available are Master, Backup
Master, and Slave. APs in the same array will use the
same configuration. The configuration will sync the
Master AP to the Slave AP and the Backup Master
AP when a Slave AP and a Backup Master AP join
the AP array
AP Array Name:
Enter a name for the AP array you have created.

AP Array

Enter a password that will be used to access the AP
Password:
array you have created.
Click the button to initiate a scan of all the available
Scan AP Array List:
APs on the network.
Connection Status:
This displays the status of the current AP array.
D-Link DAP-590 User Manual
AP Array
9